Sand cast · Machined · Inspected to print

Prototype to Low Volume
Sand Castings

Prove the design before you pay for production tooling. You'll hear back within one business day.

Trusted by engineers and OEMs
for 60+ years
  • ISO 9001:2015 certified
  • Prototypes to production runs
  • Every print reviewed before tooling
Red sand casting pattern built from the customer printAluminum sand casting poured from the same pattern
From print to pattern to part
  • 60+ Years in business
  • Certified Pattern makers
  • ISO 9001 2015 certified
  • No minimum Prototype to repeat

Two ways to a first casting

Both skip the cost of hard production tooling. We tell you which fits when we see the print.

  • ROUTE 1

    Prototype pattern

    An inexpensive pattern built to prove the design. If the part changes, we modify the pattern instead of starting over.

  • ROUTE 2

    Printed sand molds

    The sand mold is 3D printed straight from your CAD model, so no pattern is needed. Available in aluminum and iron.

  • THEN

    Into production

    When the design is locked, we build the production tooling, hold it, and run your castings, machined and inspected to print.

Does your part fit?

If most of these sound like your job, send the print.

  • PRINT

    You have a print or 3D model

    A PDF drawing, a CAD model, or both.

  • VOLUME

    A few pieces to a few hundred a year

    Prototypes first, then low volume production. Most of our programs run around 100 castings a year.

  • FINISH

    Machining, testing or certs

    Machining, inspection and documentation are handled as part of the program.

  • NO PRINT

    Worn part and no drawing?

    Send a photo. That can be a fit as well.

CPM Industries is responsive to our needs and is our best defense to fight fires. This is where CPM exceeds in both timing and price.

Mary

Send the print.
We'll tell you if it's a fit.

You'll hear back within one business day. The first reply confirms we have your RFQ and tells you if it's a fit. Then we quote. NDAs signed on request.

Send your print to sales@cpm-industries.com
Request a Quote

630.469.8200 · Monday to Friday, 7:30 AM to 4:00 PM CT

What to send

  • 01 PDF drawing and CAD model
  • 02 Alloy and quantity
  • 03 Drawing revision and specs
  • 04 Machining, heat treat, inspection, and documentation needs
Company CPM Industries
Address 1108 Heinz Dr Unit 4, East Dundee, IL 60118
Quality ISO 9001:2015
Since 1960
© 2026 CPM Industries
Request a Quote